-21%

REVO Nano Advanced Engine Treatment + KM+ Advanced Fuel Additives(400liter fuel treatment) with Eco-friendly Flush & Eco-Friendly Fuel Injector Cleaner


Compare

RM133.00 RM168.00

STEP 1

KM Advanced Engine Flush is THE ONLY engine flush that add lubrication and protection to your engine while cleaning.

KM Advanced Engine Flush is an environmental eco friendly solution. It is non toxic and qualified with REACH Compliance ( requirement to sell in Europe). Special formulation designed to dissolve sludge and clean the crankcase to enhance the life of the fresh engine oil. Clear out deposit to open narrow oil passages clogged by gunk. Release deposit and allowing the oil to flow freely. Saves wear and tear on the engine.

KEY FEATURES

  • Non- solvent base detergent to remove oil sludge and gunk with detergent method
  • Dispersant to disperse the oil sludge from oil sum and engine corners
  • Lubrication to protect the surface while cleaning

USAGE GUIDE

Before changing the used motor oil and the oil filter, add KM+ Engine Flush into the motor oil and allow the engine to run at normal idle speed for 5 minutes and rev the engine up to 3000 rpm for 30 seconds and let it idle for 10 minutes and rev the engine up to 3000 rpm for 30 seconds.Then stop the engine and drain the crankcase. Replace the filter and refill the crankcase with fresh oil.

ENGINE FLUSH COMPARISON TABLEKM+ ADVANCED ENGINE FLUSHOTHER ENGINE FLUSH
Contain volatile solventNoYes
Multi-functionYesNo
CleaningYesYes
Protect with extra lubricationYesNo
FlammableNoYes
Bio degradableYesNo
Eco FriendlyYesNo
Contain VOC Solvent causing ground level ozone pollutionNoYes
ToxicNoYes
Contain 100%natural estersYesNo
Can rev your car after added engine flushYesNo
Clean engine effectively with higher RPMYesNo
Disperse oil sludge deposits effectivelyYesNo

Best way to compare the Flush – Add 1 bottle of KM+ Advanced Engine Flush into the engine before you change engine oil and then drive a few kilometers. You will feel the difference in your car performance !

STEP 2

What is REVO?

REVO is a highly concentrated Advanced Engine Friction Reducer and Modifier additive that works with most synthetic, semi-synthetic and mineral engine oils.

Designed with similar friction modifier used in the Aeronautics and Space Technology, researchers at REVO achieved a revolutionary technology breakthrough in reducing engine drag, friction and noise to a point where drivers can actually feel the difference in their vehicle’s performance almost instantaneously upon using REVO.

NANO Friction Reducer. REVO Advanced Engine Treatment & Friction Reducer

NANO Friction Reducer. REVO Advanced Engine Treatment & Friction Reducer

USAGE GUIDE

Revo can be added to your engine oil at anytime.

For better performance, repeat the use of REVO at every 5000km intervals or at every oil change.

SUITABLE for

– Petrol , Diesel Engines as well as NGV vehicles

– Fully Synthectic, Semi- Synthetic or Mineral oil

– Natural Aspirated and Turbo engines

Tips:- If you have just changed new engine oil, add REVO after travelling a distance of at least 50km first – to noice the performance difference with REVO added

STEP 3

KM+ Advanced Fuel Injector Cleaner is an ECO friendly cleaning solution. It is also a fuel system cleaner. Contains no volatile organic solvent. It is specially formulated to remove gum and deposit in fuel delivery system. It cleans fuel pump, injectors and intake valves.

 

KM+ Advanced Fuel Injector Cleaner is the only solution that add Lubrication and Protection to your fuel delivery system while cleaning. It is non toxic and qualified with REACH Compliance ( requirement for Europe).

 

KEY FEATURES

  • For Petrol or Diesel Vehicles
  • Lubricate fuel pump, injectors and intake valves to protect the system while cleaning
  • Effectively clean injectors, intake valves and combustion chambers through detergent cleansing approach
  • Contain no Volatile Organic solvent, non corrosive
  • Reduce all unwanted emissions
  • Restore engine performance

USAGE GUIDE

Pour the whole bottle of KM+ Advanced Fuel System/Injector Cleaner into the fuel tank. It is more effective to have fuel around 20 to 30 liters in fuel tank. Drive as normal.

STEP 4

KM+ Fuel Additive is an environment friendly, non-toxic and biodegradable fuel additive to OPTIMISE fuel combustion for optimal energy conversion to POWER, saves fuel and reduce emission. For Petrol, Diesel and hybrid combustion engines.

Three key functionalities of KM+ are :

  • Fuel Atomization– To improve Fuel Combustion.
  • Cleansing Functionality– To Clean and Restore engine condition to achieve Optimized Combustion.
  • Added Lubricity– To reduce Wear and Tear to prolong Life span of engines.”
atomization with KM+.jpg

FUEL ATOMIZATION BENEFITS

  • Optimum fuel combustion.
  • Increase Horsepower.
  • Increase Torque.
  • Cleaner engines.
  • Reduce Black smoke.
  • Less Carbon Soot.
  • Less Carbon Deposits.
  • Reduce Toxic Exhaust Emissions.
  • Increase Engine Lifespan.
  • Reduce fuel consumption.
KM+ lubricates new label.jpg

CLEANSING BENEFITS

  • CLEAN ENGINE.
  • Optimum fuel combustion.
  • Better Compression Ratios.
  • Reduce Maintenance Costs.
  • Increase Engine Lifespan.
  • Reduce fuel consumption.
Lubricates with KM+ new label.jpg

ADD LUBRICATION TO UPPER PART OF CYLINDER BENEFITS

  • Smoother drive.
  • Reduce Maintenance Costs.
  • Reduce Engine Vibration,Quieter Engine.
  • Reduce Engine Temperature.
  • Reduce wear and tear.
  • Increase Horsepower.
  • Increase Torque.
  • Reduce fuel consumption

Case 1 : TEST conducted on Toyota Corolla

BEST selling car in the world.

As at July 2013, it has sold 40 million units in its 11 generations of Corollas.

SYSTEMATIC AND SCIENTIFIC TESTING on a TOYOTA COROLLA ALTIS 1.8 year make 2013

The test was done systematically and scientifically to compare fuel consumption without and with KM+ Advanced Fuel Additive.

TEST PARAMETERS:

1. Loop Test: Start from Petron Station in SD to Sungkai Tolland back to Petron Station SD
2. Total Loop distance: 209.8km
3. Test driving speed: Average 100km/h (consistent +/- 2km)

TEST RESULTS

WITHOUT ANY ADDITIVE
Total Fuel Consumed: 12.426L
Average Fuel Economy of: 16.88 km/l

AFTER ADDITING KM+ ADVANCED FUEL ADDITIVES
Total Fuel Consumed: 9.595L
Average Fuel Economy of: 21.67 km/l

Total Fuel Economy improve/save by: 28.4%!

Prove of Saving - Toyota Corolla 1.8 2013 KM+ new label.jpg

 

 

myvi increasepower with KM+ new label.jpg

 

YOU will experience more POWER while your car saves fuel !

save petrol with KM+.jpg

Reduce emission with KM+ new label.jpg

 

 

 

 

 

 

 

 

Category:
Preview
Close